Water-cooling Pulverizer / 수냉식 연속식 분쇄기 |
|
|
|
|
|
|
|
|
|
** 특징 **
- 성능은 소규모 분쇄용으로 재료의 연속적인 투입이 가능하며, 크기는 소형이다.
- 기본원리는 연속식분쇄기와 동일하나 분쇄조 밑면에 수냉장치를 설계하여 분쇄물의 열변성을 최소화하고 동종의 제품보다 더욱 더 강력한 모타를 채택하여 회전수가 1.8배가 되어 풍력이 증대되어 분쇄량이 2배이상으로 윗기종인 35와 비슷하다.
- 60목, 120목, 180목의 추말용 스텐레스 재질의 체를 원하는 대로 내부에 장착하여 균일하고 세밀하게 분쇄할 수 있다.
- 특수 경질 합금 강철의 망치식 분쇄날은 잘 부러지지 않을 뿐만 아니라 쇳가루가 나올수 없는 내부 설계가 되어 있다. 분쇄조 벽면의 V홈과 기계몸체가 스텐레스강으로 되어 있다.
- 특수한 구조로 진동이 없고 저소음이며, 효율이 높고 조작은 간단하며, 이동이 편리하고 안정성이 높다.
- 단단한 것에서부터 부드러운 것 까지 추말, 극세말까지 분쇄의 범위가 넓다.
- 구조가 정밀하고 공간 차지가 적고, 가루먼지가 날리지 않아서 위생적이고 사용이 간편하다. - 가정에서는 구매하여 사용할
수가
없다. |
|
모델 명 |
KF-25
수냉식 |
KF-20 |
시간당 생산량 |
5~50 kg/h |
5~10 kg/h |
전압 |
220V |
220V |
세밀도 |
60~180目 |
60~180目 |
소비전력 (kw) |
2.2kw |
1.2kw |
중량 (kg) |
approx. 35kg |
approx. 25kg |
RPM |
5000 rpm |
2840 rpm |
규격 (WxDxH) |
52 x25x73 cm |
50x17x55 cm |
|
|
** Characteristic **
Water-cooling grinder works under the same principles with the continuous feeding grinder. But the rotation speed of the main spindle increased by 1.8 fold with stronger wind power. The water-cooling grinder can raise the powder production by 2.5fold. Shoot the material in succession , the hammer type is crushed , the hammer material adopts the alloy steel of hard quality, the wearability is strong, with the screen mesh, according to the concrete demand, through change different network block of specification crush different detailed degree , detailed powder is passed Sack export ; The special framework has no vibration to operate definitely, with low noise, it is extremely low to loss, with high efficiency, operate Simple, move conveniently, the security is high. |
|
Model Type |
KF-25 |
KF-20 |
Production capacity |
5~50 kg/h |
5~10 kg/h |
Voltage (V) |
220V |
220V |
Crush thin degree |
60~180 |
60~180 |
Power (kw) |
2.2kw |
1.2kw |
Rotational speed
(r/min) |
5000rpm |
2840rpm |
Weight (kg) |
approx.
35kg |
approx.
25kg |
Dimensions
(W x D x H) |
52 x25x73 cm |
50x17x55 cm |
|
|
|
|
|
|
|
|
|
|