다기능분쇄기 랩용 연속식분쇄기KF-20 수냉식연속식분쇄기KF-25
연속식분쇄기KF-35 유질분쇄기KOC-01
 
 
만능분쇄기 티백용분쇄기 다목적만능분쇄기
미분쇄기KMA200 기류식미분쇄기KMS200 연속식 기류식초미세분쇄기KMS300
미세분쇄기 건습식분쇄기    
 
 
미세분쇄기KHMB-705S 미세분쇄기KHMB-705A 미세분쇄기KHMB-715S
미세분쇄기KHMB-710A 기류분쇄기 제트밀KAFP-100 선식분쇄기
롤러분쇄기 입도조절분쇄기KAGM-70    
 
 
Air Flowing Pulverizer KAFP100/ 300
기류식 제트밀 분쇄기 KAFP100/ 300
 
     
 
 
 
 
특 징 과 용 도
- 압축된 공기가 분쇄조안으로 진입하여 분쇄조 외벽에 위치
한 4개의 노즐로 압축공기를 분사한다
- 분쇄물에 기류를 고속으로 충돌시킴과 동시에 분쇄물 상호간의 충돌로 분쇄를 한다.
- 분쇄기 내부의 분리튜브가 세밀한 입자는 외부로 보내고 거친 입자는 분쇄조안으로 다시 보내 분쇄를 반복하고 연속적으로 이런 분쇄의 과정을 거치기 때문에 분리튜브로부터 회수한 입자는 균등한 초미세 입자를 얻을 수가 있다.
- 건식 초미세분쇄에 사용하며 기류충돌 속도가 마하 2.5이상이며 일반적인 분쇄상황에서는 1~10μm(12,700~1,340mesh)정도의 분쇄입자를 얻을 수가 있으며 분쇄물에 따라서 1μm까지 분쇄가 가능하다.
- 분쇄기 내부에 분리튜브장치가 있기 때문에 분쇄물중 거친 입자는 끊임없이 순환하면서 분쇄된다. 그런 까닭에 균등한 입자를 얻을 수가 있어 입자 분포도의 범위가 좁다.
- 분쇄시간이 비교적 짧고 기계의 구성이 간편하고 조작과 상태확인이 편리하고 설치 면적이 효율적이며 72dB정도의 저소음과 진동이 거의 없는 것이 장점이다.
- 분쇄기 효율이 높고 연속적인 분쇄가 가능하고 분쇄물의 순도가 뛰어나다.
- 분쇄기 열발생이 거의 없어 분쇄물의 성질에 변화를 주지 않으며 쇳가루 발생이나 기타 오염으로부터 자유롭다.
- 잔고장이 거의 없어 장기적으로 유지비가 저렴하여 경제적이다.
- 생산량과 분쇄물의 종류에 따라 대형의 설비도 가능하다.
구 조
-
위 그림중 FLOW CHART를 참조.

적 용 범 위
광물:고령토、운모、흑연、중정석、석영、탄산칼슘、지르콘、활석 등。
화학:삼황화몰리브덴、삼산화비소、티탄백、산화알루미늄、염료、도료、카본 등。
전자:티탄산바륨、삼산화이크롬 등。
농약:카벤다짐、지오파네이트-메틸、제초체、살충제 등。
 
 모델 명 KAFP-100 KAFP-300
 작업방식 압축공기 압축공기

 토출공기량(㎥/min)

3 6
 최고압력사용(MPa) 0.7 ~ 1 (7~10㎏/㎠) 0.7 ~ 1 (7~10㎏/㎠)

 입료크기

60目(50mesh)이하 60目(50mesh)이하
 분쇄세밀도 1~10μm 1~10μm
 콤프레셔 와트수 22Kw 37~45Kw
 생산량 (농약400目기준) 2~30 kg/h 100~200kg/h
 설치면적 (W x D x H) 2 x 3 x 2.5 m 5x 3 x 4 m
 
** Characteristic **
When the compressed air passes the feeding spray equipment and the smashed material gets into the smashing room,the smashing sqray nozzle on the periphery of the smashing room spray supersonic speed airflow so that it can make the material smashed with the airflow's high speed lashing,the material's collinding and friction each other.Then grading tube will separate the coarser pellets from others and the coarser pellets will circuclate back to the amashing room to be smashed again.Arter the inter sealed cycled smashing,we Can get the well-distrbuted supertiny powder at the material outlrt.
1、It's suitable for dry supertiny technology.Because the speed of the impact is high,(more than 2.5Mach),it's easy to get 1-10 micron pellet.According to the material's property,it also can get the pellit less than 1micron sometimes.
2、Because there is a sealed grade mechanism in the pulverizer and the coarse pellets in the products instantly can be smashed cycldly,the products are made up of well-distributed products whose peller radium distibution's scxpeis limited.
3、The equipment has many advantages such as short smashing time,simple structure,convenient operation and repairment,small volum,low noise(72 decibles)and no vibration.
4.It has a high efficienty when smashing.it can have a continuous smashing and it can keep the smashing Rproduct's pury.

 
 Model Type KAFP-100 KAFP-300
 Operating medium Compressed air Compressed air
 Air consumption 3 ㎥/minr 6 ㎥/min
 Working pressure 0.7~1 MPa 0.7~1 MPa
 Feed diameter < 50mesh < 50mesh
 Fineness 1~10μm 1~10μm
 Compressor power 22 Kw 37~45Kw
 Capacity (400mesh) 2~30 kg/h 100~200kg/h
 Dimensions (WxDxH) 2 x 3 x 2.5 m 5x 3 x 4 m